Phosphine Gas Detector Uniphos Fumisense Pro PH3-Hi Detector

FumiSense Pro–Hi is a handheld phosphine gas monitor for monitoring fumigation levels inside the fumigated stack/ silo/ ship to ensure the desired level of PH3 is present inside. Equipped with an inbuilt air sampling pump capable of drawing a sample from a distance of 30m and a sensor capable of measuring PH3 up to 2000 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location. Specification Gas Name: Phosphine Range: 0-2000 ppm Resolution: 1 ppm Sensors:  Electrochemical sensor Accuracy:  Inherently +/- 2% FS (but also depends on the calibration gas & method) Drift:  less than 2% of the signal per month at constant temperature and pressure. Sampling modes:  Draws Gas sample on continuous basis. Pump remains ON till SET key is pressed to stop sampling. Alarm set point:  One user settable alarm set point (for low range detectors) Data Storage:  Provision to store test records with gas conc. and alarm set points along with date and time. Power source:  7.4V mAh Li-ion rechargeable battery pack Inbuilt Pump Flow Rate:  400 to 800 ml/min Power:  3.5V DC, 60 mA Runtime:  About 6 – 8 hours Data Transfer:  USB communication for data transfer from instrument to computer Function keys:  UP, DOWN, SET & ENTER Operating temperature:  -0 °C to 40 °C Display:  Large 20 x 4 Alphanumeric OLED Instrument Enclosure:  High Impact ABS Size:  Height = 205 mm Depth = 38 mm Width1 = 108 mm Width2 = 65 mm Weight:  500 g Accessories:  Dust filter, battery charger, data downloading cable and outlet coupler.